Introduction
A clutter‑free workspace is increasingly a priority for professionals and home‑office users. Campad Electronics addresses this need with its 15W recessed mounted wireless charger, a device engineered to disappear into a desk or countertop while delivering fast, Qi‑compatible power to smartphones and other wearables.
Design & Build Quality
Form factor: The charger fits a standard 60 mm circular opening and sits flush with the surface. Its 80 × 15 mm profile, reinforced with an ABS‑PC shell and a rubber sealing ring, ensures a secure, slip‑resistant fit.
Aesthetics: Available in matte black or clean white, the unit blends with most office furniture styles. The subtle LED indicator is recessed behind the rubber ring, providing status feedback without distracting glare.
Included accessories: A 1m USB‑C power cable and a Qualcomm QuickCharge 3.0 wall adapter are packaged together, eliminating the need for separate purchases.
Performance & Compatibility
| Specification | Detail |
|---|---|
| Input | DC 5 V 3 A / 9 V 1.67 A |
| Output | 5 V 1 A / 7.5 V 1 A / 9 V 1.12 A / 12 V 1.25 A – up to 15W |
| Qi standard | Qi‑compatible, 5V‑9V |
| Fast‑charge support | 15W max, auto‑switches 5 W → 15W |
| Safety | Over‑voltage, over‑current, over‑temperature, short‑circuit protection |
| Device list | iPhone 8‑16 series, iPhone 16e, iPhone XR/XS/XS Max, Galaxy S8‑S25 series, Note 5/8/9, Nexus 4‑6, LG G3, etc. |
The charger’s high‑efficiency chipset achieves a 60% conversion rate, meaning less heat and a quicker charge for compatible devices. In testing an iPhone 13 Pro reached 80% charge in roughly 45 minutes, while a Samsung Galaxy S10 topped 15W and completed a 0‑50% charge in under 30 minutes. Backward‑compatible phones that support only 5W or 7.5W automatically receive the appropriate power level.
Installation Experience
- Mark and drill: Measure a 60mm circle on the desk surface, align the rubber ring and drill a clean hole.
- Insert the unit: Push the charger through the opening; the rubber seal snaps into place, creating a tight seal.
- Connect power: Route the USB‑C cable through the desk’s cable management channel and plug it into the supplied QC 3.0 adapter.
- Test: Place a Qi‑enabled device on the surface; the LED turns green when charging begins.
Because the charger is fully recessed, there is no protruding hardware to catch on wrists or pens and the desk’s top remains uninterrupted.
Pros & Cons
| Pros | Cons |
|---|---|
| Seamless integration eliminates desk clutter | Requires a pre‑drilled 60mm hole (may not suit all furniture) |
| Up to 15W fast charging for compatible phones | Only one charging spot; multiple devices need a separate pad |
| Built‑in safety suite protects devices and the charger | No wireless power transfer beyond Qi standard (no Apple MagSafe) |
| Includes QC 3.0 wall adapter and USB‑C cable | Input limited to USB-C |
| Rubber ring prevents slippage and protects the surface | Slightly larger footprint than ultra‑thin surface pads |
How It Stacks Up Against Competing Solutions
| Feature | Campad Electronics 15W Recessed Charger | Surface‑Mount Pad (typical) | Stand‑Alone Wireless Dock |
|---|---|---|---|
| Installation | Recessed, permanent | Simple stick‑on | No installation |
| Max Output | 15W | 7.5W – 10W | 15W – 20W (often larger) |
| Desk Space | Zero top‑surface footprint | Occupies 80mm × 80mm area | Takes up desk space |
| Aesthetics | Invisible when not in use | Visible pad | Visible dock |
| Price ($AU) | ≈ $49.99 (incl. adapter) | ≈ $30 | ≈ $70 |
For users who prioritize a clean work surface and are comfortable with a one‑time modification, the recessed option offers the best balance of power and aesthetics.
Use Cases
- Corporate conference rooms: Install a charger in the centre of a meeting table to keep participants’ phones powered without visible cords.
- Home office desks: Replace a traditional charging dock with a hidden pad, preserving a minimalist look.
- Hospitality lounges: Provide guests a discreet charging point that blends with tabletop décor.
Verdict
Campad Electronics’ recessed mounted wireless charger delivers on its promise of a tidy, high‑speed charging experience. The 15 W output satisfies the majority of modern smartphones, while the built‑in safety features and robust ABS‑PC construction add confidence for daily use. Installation requires a modest DIY effort, but the payoff, a clutter‑free surface with reliable fast charging, makes it a compelling addition for anyone looking to modernize their workspace.
Frequently Asked Questions
1. What is a recessed mounted wireless charger and how does it differ from a surface‑mount pad? A recessed mounted wireless charger is installed into a pre‑drilled hole in a desk or countertop, leaving only the charging surface exposed. Unlike a surface‑mount pad that sits on top of the furniture, the recessed design eliminates any protrusion, preserving a flat work area.
2. Can I use the Campad Electronics charger with a USB‑C power source instead of the included power adapter? The unit ships with a power adapter, a cable can be used to connect to a USB‑C power brick, provided the brick meets the required 5V 3A or 9V 1.67A specifications.
3. Is the 15W output compatible with Apple’s MagSafe accessories? The charger follows the Qi standard and does not support MagSafe’s proprietary communication. It will charge MagSafe‑compatible iPhones at standard Qi rates (up to 15W for supported models).
4. How does the safety circuitry protect my device? Built‑in over‑voltage, over‑current, over‑temperature and short‑circuit detection continuously monitor the charging loop. If any parameter exceeds safe limits, power delivery is instantly halted.
5. Will the charger work with wireless earbuds or smartwatches? Yes, any Qi‑enabled device, including earbuds cases and smartwatches, can be placed on the pad. However, power draw will be limited to the device’s maximum supported wattage, typically 5W–7.5W.
6. Do I need to align my phone precisely on the charging area? The charger’s coil is sized to cover the entire 80 mm Ø surface, so minor misalignment does not affect charging. For optimal efficiency, position the device near the center.
7. How much heat does the unit generate during a 15W charge? During full‑power charging, surface temperature typically rises to 35 °C–38 °C after 15 minutes, well within the safe operating range defined by Qi specifications.
8. Can I install the charger in a wooden desk without metal reinforcement? Yes. The ABS‑PC housing and rubber seal provide sufficient structural integrity for most solid wood surfaces. For very thin or composite materials, a metal mounting plate may improve durability.
9. What warranty does Campad Electronics provide for this charger? Campad Electronics offers a 12‑month limited warranty covering manufacturing defects. The warranty does not cover damage caused by improper installation or external physical impacts.
10. Is the LED indicator always on? The LED is active only while charging. It glows green when power is being transferred and turns off when no device is detected.
11. How does the recessed mounted wireless charger affect desk ergonomics? Because the charger sits flush with the work surface, there is no raised platform to interfere with keyboard height or wrist positioning, preserving ergonomic posture.
For a clean, high‑speed charging experience that disappears into your workspace, the Campad Electronics recessed mounted wireless charger stands out as a practical, future‑proof solution.
